Advert reference: 21009
Listed in: Integrated amplifiers
We have this preowned Perreaux éloquence 150i Integrated Amplifier in Silver.
It is in very good condition which can be seen in the pictures attached.
It comes with the original box/packaging, remote control, UK mains lead and user manual.
Perreaux éloquence 150i
The 150i is a compact integrated amplifier with big attitude. It has been designed with precision engineering using the latest in technological advances to ensure seamless integration into any system. The 150i won't disappoint.
Optional internal 24-bit/192kHz Digital to Analogue Converter (DAC) and Moving Magnet/Moving Coil (MM/MC) Phono Preamplifier modules ensure complete integration of digital source components (such as network music servers and set-top digital receivers), as well as turntables, into a high-performance system.
General Features
High Power Design
The 150i is designed to handle difficult speaker loads with ease. With it's high powered MOSFET design, the 150i is capable of continuously delivering a genuine 190Wrms into an 8Ω load and a huge 300Wrms into 4Ω.
High-current Custom Power Supply
At the heart of any great amplifier is a great power supply. The 150i features 2 high current independent power supplies, for controlled, quality audio.
High Damping Factor
The éloquence 150i's performance features a high damping factor. Ensuring absolute authority and control of any loudspeaker.
Advanced Microprocessor Control
The extensive range of user functions and complex functions are managed by a powerful onboard microprocessor. This gives you more control but is electrically isolated from the audio paths, ensuring faithful sound reproduction.
Advanced Stepped Volume Control
3rd generation microprocessor controlled analogue volume control. The eloquence has advanced all the benefits of a pure unaltered analogue signal path which is merely "switched" to your exact desired volume. This gives you convenience and complete control with the cleanest signal path possible.
Advanced Lossless Stepped Off-Set Balance Control
3rd generation microprocessor controlled analogue balance control. There is no loss of music quality due to the left and right volume controls being analogue "switched" independently without added circuitry. This is the ultimate in allowing you to perfectly adjust the balance volume left or right without signal loss.
Non-Invasive Protection
The 150i features sophisticated microprocessor protection for the amplifier and connected load. The protection covers over-current, over-temperature, DC offset, internal AC supply and DC fuse protection. The protection is non-invasive and does not degrade the signal path.
Balanced (XLR) input
For use with balanced sources. Enabling you to take full advantage of the benefits of balanced audio.
Home Theatre/Pass-Through Loop
Allows the integration of the éloquence into a home theatre/external system as a two channel power amp, then back to full a stereo integrated for music listening.
IR (infrared) input and output
Enables additional remote control options to be connected and controlled by the éloquence Integrated Amplifier.
Isolation Feet Options
To minimize vibrations, aftermarket "feet" can be easily attached if desired. Also, the éloquence has the ability to go from 4 feet to 3 feet to further ensure mechanical isolation
User Controls
Interactive Menu System
Infrared (IR) Remote Control
Volume Up/Down
I/O Compliment
1 pair Balanced Inputs (XLR)
4 pairs Unbalanced Inputs (RCA)
1 pair Unbalanced Line Outputs (RCA)
1 pair Unbalanced Preamplifier Outputs (RCA)
2 pairs Binding Posts per channel
1 Trigger output (3.5mm jack)
1 External IR input (3.5mm jack)
1 IR output (3.5mm jack)
1 RS232 serial port (RJ45)
MM/MC Phono Stage
Allowing both Moving Magnet (MM) and Moving Coil (MC) cartridge connection.
Dimensions
Width: 426mm (16.8")
Depth: 344mm (13.5")
Height: 102mm (4.0")
Weight: 17kg (37.4lb)
Amplifier
Rated Power Output (per channel): 150W into 8Ω
300W into 4Ω
Maximum Power Output (prior to clipping, per channel): 190W into 8Ω
310W into 4Ω
Total Harmonic Distortion + Noise
Typically:
20Hz to 20kHz:
0.002% @ 1kHz, 150W into 8Ω
less than 0.040%, 150W into 8Ω
Frequency Response
20Hz to 20kHz:
5Hz to 60kHz:
+0.00dB, -0.15dB
+0.00dB, -0.50dB
Damping Factor: 800 @ 1kHz, 150W into 8Ω
Signal to Noise Ratio (unweighted): better than 96dB, ref. 150W
Preamplifier
Input Impedance
Unbalanced: 12kΩ
Balanced: 22kΩ
Input Overload
Unbalanced: 8Vrms
Balanced: 8Vrms
Volume Control Range: -95.5dB to +31.5dB
Volume Control Resolution: 0.5dB per step
Input Volume Trim Range: ±40dB
Balance Resolution: 0.5dB
Balance Range: ±40dB
éloquence DAC Module Specifications
Digital Inputs: 2 SPDIF Coax (BNC)
2 SPDIF Optical (Toslink)
1 USB (Type B)
Input Sample Rate: 32, 44.1, 48, 88.2, 96, 176.4, 192kHz (Coax, Optical)
32, 44.1, 48kHz (USB)
Input Word Length (maximum): 24-bit (Coax, Optical)
16-bit (USB)
Input Impedance: 75Ω (Coax)
Transformer Coupled
Coax:Yes
Optical:No
USB: No
Analogue Section
Digital to Analogue Conversion: 24-bit / 192kHz
Output Voltage: 2.0Vrms @ 0dBFS
Total Harmonic Distortion + Noise
Typically
0.002%, 20Hz-20kHz @ 0dBFS
Frequency Response
20Hz to 20kHz:
5Hz to 94kHz:
+0.0dB, -0.1dB
+0.0dB, -3.0dB
Dynamic Range (unweighted): better than 115dB @ 0dBFS
Signal to Noise Ratio (unweighted): better than 115dB @ 0dBFS
Channel Separation: better than 110dB @ 0dBFS
Stop Band: 105kHz
Stop Band Attenuation: 125dB
éloquence Phono Module Specifications
Input Impedance
Low Gain (MM): 47kΩ
High Gain (MC): 100Ω
Input Capacitance:
22pF
Gain
Low Gain (MM):40dB
High Gain (MC):60dB
Total Harmonic Distortion + Noise
Typically: 20Hz to 20kHz:
0.002% @ 1kHz, low gain setting
less than 0.010%, low gain setting
RIAA Accuracy: ±0.5dB, 20Hz-20kHz
Signal to Noise Ratio (unweighted):
better than 85dB, low gain setting
TI-1-59641
6 Hepworth
Silver Street
Hull
hu1 1ju - United Kingdom